Blind Rivets

buy rivetsonline

Nail Type (Basic) Blind Rivets

Nail Type (Basic) Blind Rivets

Rivet Series Number Nominal Rivet Size (D) Body Diameter (W) Mandrel Diameter Dome Head Large Flange Countersunk Head Hole Size and Drill Number
Max. Min. (A) Head Dia. (H) Max Head Dia. (A) Head Dia. (H) Max Head Dia. (A) Head Dia. (H) Max Head Dia.
3 3/32 (2.4mm) 0.096 0.090 0.057 0.187 0.032 0.281 0.040 0.180 0.028 .097-100 (#41)
4 1/8
(3.2mm)
0.128 0.122 0.076 0.250 0.040 0.375 0.065 0.226 0.032 .129-.133 (#30)
5 5/32
(4.0mm)
0.159 0.153 0.095 0.312 0.050 0.469 0.075 0.281 0.040 .160-.164(#20)
6 3/16
(4.8mm)
0.191 0.183 0.114 0.375 0.060 0.625 0.092 0.344 0.050 .192-.196(#11)
8 1/4
(6.4mm)
0.255 0.246 0.151 0.500 0.080 0.750 0.107 0.468 0.071 .257-.261(F)

Closed End Rivets

Closed End Rivets Closed-End Blind Rivets Closed-End Blind Rivets

Dimensions of Dome Head Style Break Mandrel Closed End Blind Rivets

Rivet Series NO. Nom Rivet Size D H E R W P F L
Body Dia Style 1 Regular Head Radius of Fillet Mandrel Dia Mandrel Protrusion Blind Side Protrusion Rivet Body Length
Head Dia Head Height All Materials
Max Min Max Min .Max Max Min Max Max
4 1/8 (.125) 0.128 0.122 0.252 0.224 0.050 0.025 0.074 1.00

Equal to "L" Rivet Body Length

See Table 2

5 5/32 (.156) 0.159 0.153 0.328 0.296 0.065 0.025 0.092 1.06
6 3/16 (.187) 0.191 0.183 0.394 0.356 0.080 0.025 0.110 1.06
8 1/4 (.250) 0.255 0.246 0.525 0.475 0.100 0.025 0.146 1.06
See Notes 3 4

Multigrip Rivets

Multigrip Rivets Benefits:
  • Extended grip range capacity reduces inventory (fewer sizes required).
  • Use as a standard open-end rivet.
  • No special tools required.
Multigrip Blind Rivets
RIVET NO. "D" "H" "E" "L" GRIP RANGE
PR43ASPAA 0.130 0.121 0.260 0.240 0.040 0.315 .039-.187
PR44ASPAA 0.437 .039-.250
PR45ASPAA 0.453 .157-.312
PR47ASPAA 0.595 .251-.441
PR54ASPAA 0.161 0.153 0.327 0.299 0.050 0.402 .047-.250
PR55ASPAA 0.484 .126-.315
PR58ASPAA 0.717 .376-.500
PR64ASPAA 0.183 0.193 0.358 0.394 0.060 0.425 .063-.250
PR66ASPAA 0.606 .126-.375
PR68ASPAA 0.717 .188-.500
PR612ASPAA 1.051 .438-.750
PR43ASLAA 0.130 0.121 0.390 0.358 0.065 0.315 .039-.187
PR44ASLAA 0.437 .039-.250
PR45ASLAA 0.453 .157-.312
PR47ASLAA 0.595 .251-.441
PR54ASLAA 0.161 0.153 0.484 0.449 0.075 0.402 .047-.250
PR55ASLAA 0.484 .126-.315
PR58ASLAA 0.717 .376-.500
PR64ASLAA 0.183 0.193 0.602 0.650 0.091 0.425 .063-.250
PR66ASLAA 0.606 .126-.375
PR68ASLAA 0.717 .188-.500
PR612ASLAA 1.051 .438-.750

*Countersunk Head Styles Available Upon Request

Bulbex Blind Rivets

Bulbex Blind Rivets
Series Head Style Material Finish
Rivet Mandrel Rivet Mandrel
AAPAB Lo Profile Aluminum Aluminum Plain Plain
AALAB Large Flange Aluminum Aluminum Plain Plain
Lo-Profile Head Large-Flange Head
Nom. Rivet Diam. Hole Size E Max. ARivetDiam. BNom.Head Diam. D Max. Head Ht. B Nom. Head Diam. D Max.Head Ht.
5/32" .165-.177 0.09 0.165 0.312 0.06 - -
(4.0mm) (4.20-4.50mm) (2.27mm) (4.19mm) (7.9mm) (1.53mm) - -
3/16" .197-.207 0.112 0.197 0.387 0.08 0.61 0.08
(4.8mm) (5.00-5.25mm) (2.83mm) (5mm) (9.83mm) (2.04mm) (15.5mm) (2.04mm)
Rivet Diam. Grip Range M Max. AAPAB - Dome Head Aluminum Rivet Aluminum Mandrel AALAB - Large Flange Head Aluminum Rivet Aluminum Mandrel
5/32"(4.0mm) .040-.118(1.00-3.00mm) .630(16mm) PR52AAPAB -
.040-.275(1.00-7.50mm) .840(21.2mm) PR54AAPAB -
3/16"(4.8mm) .040-.157(1.00-4.00mm) .720(18.3mm) PR62.5AAPAB PR62.5AALAB
.040-.354(1.00-9.00mm) .920(23.3mm) PR66AAPAB PR66AALAB
.157-.472(4.00-12.00mm) 1.07(27.1mm) PR68AAPAB -

2 Piece Mate Rivets

2 Piece Mate Rivets2 Piece Mate Rivets

A two-piece Non-Structural fastening rivet system for extra-long grip applications.

Tubular Component Diam. Hole Size and Drill Number Blind Rivet Tubular Comp.
Mand Diam. Rivet Diam. Head Diam. Head Thick Rivet Diam Head Diam. Head Thick
3/16" (4.8mm) 250 (6.4) .076 (1.9) .125 (3.2) .375 (9.5) .059 (1.5) .188 (4.8 .375 (9.5) .057 (1.)
1/4" (6.5mm) .312 (7.9) .114 (2.9) .187 (4.8) .625 (15.9) .095 (2.4) .250 (6.4) .625 (15.9) .095 (2.4)

Basic Structural Rivets

  • Interlock
    Interlock rivets
    3/16SteelAlumStainless
    Shear 1300 600 1300
    Tensile 1200 500 950
    Pin Pushout 150 50 100
    1/4SteelAlumStainless
    Shear 2500 1300 2350
    Tensile 2200 890 1800
    Pin Pushout 300 100 200
  • Monobolt
    Monobolt rivets
    Diam. Series Hole Size D Diam. Protruding Large Flange Protruding Countersunk
    A A B Max. A B Ref. B Max.
    3/16" (4,8mm) FFPV .194-.204 (4,93-5,18) .184-.193 (4,67-4,90) .355-.400 (9,02-10,16)
    SSPV .355-.400 (9,02-10,16)
    AAPV .355-.400 (9,02-10,16)
    SSLV .500-.530 (12,70-13,46) .105 (2,67)
    SSCV .325-448 (8,26-9,14) .070 (1,78)
    1/4" (6,3mm) FFPV .261-.276 (6,63-7,01) .254-.260 (6,45-6,60) .480-.530 (12,19-13,46)
    SSPV .480-.530 (12,19-13,46)
    AAPV .480-.530 (12,19-13,46)
    SSCV .395-.448 (10,03-11,38) .079 (2,01)
    AAPV .094 (2,39)

    Minimum Rivet Shear and Tensile and Mandrel Retention

  • Q™ Rivets
    Q™ Rivets

    Q™ Rivet Specifications

    Q™ Rivet Diam. Series AA Alum. Rivet Alum. Mand. Series AS Alum. Rivet Steel Mand. Series SS Steel Rivet Steel Mand. Series MS Monel Rivet Steel Mand. Series FF Stain. Rivet Stain. Mand.
    Shear Tens. Shear Tens. Shear Tens. Shear Tens. Shear Tens.
    1/8" (3,2) 225 (1001) 250 (1112) 350 (1557) 325 (1445) 500 (2224) 400 (1779) 650 (2891) 525 (2335) 700 (3114) 600 (2669)
    5/32" (4,0) 325 (1445) 325 (1445) 525 (2335) 450 (2002) 700 (3114) 550 (2446) 950 (4226) 900 (4003) 1050 (4670) 1000 (4448)
    3/16" (4,8) 500 (2224) 450 (2002) 750 (3336) 650 (2891) 1050 (4670) 825 (3670) 1450 (6450) 1100 (4893) 1650 (7339) 1300 (5782)
    1/4" (6,4) 850 (3781) 750 (3336) 1250 (5560) 1050 (4670) 1750 (6450) 1450 (6450) 2350 (10453) 2150 (9563) 2450 (10898) 2250 (10008)

    Note: This table reflects typical results in test parameters.

    Q™ RIVET Fastening System
  • T-Rivets
    T-Rivets 1/4 Body Diameter
    Part No. Rivet Dia. Drill No./Hole size "A" Head Dia. "B" Hd. Height. Max "L" Rivet Length Max. Grip Range. Inches Special Notes
    PR8-115BSPT 1/4"(.250) .257-.261 .500 .120 .520 .090-.115 **black anodized
    PR8-125BSPT .520 .062-.125
    PR8-140BSPT . .520 .032-.140
    PR8-187BSPT .582 .140-.187
    PR8-312BSPT .707 .251-.312
    PR8-375BSPT .770 .312-.375
    PR8-437BSPT .832 .376-.437
    PR8-620BSPT .967 .520-.620

    Shear: 1500
    Tensile: 1000

Bulb Tite Blind Rivets

Bulb Tite Blind Rivets Bulb Tite Blind Rivets Bulb Tite Blind Rivets
HOW THE BULB-TITE WORKS:
During installation the rivet body folds into three separate legs, forming the blind-side upset head. The Bulb-tite mandrel breaks off *flush with the rivet head. *Flush mandrel break requires use of special Bulb-tite installation tool nose tip.
WEATHER TIGHT:
A special nose tip on the rivet installation tool crimps a crown feature on the rivet head. This crown-crimp effectively seals the rivet bore off from intrusion of dirt and moisture. Adding the optional washer to the Bulb-tite, creates an additional seal around the perimeter of the rivet head, to stop moisture from intruding beneath the rivet head.
HIGH STRENGTH:
Another benefit of the Bulb-tite rivet's retained mandrel core is the added strength it provides. Bulb-tite rivets are less prone to failure in high shear loads.
HIGH CLAMPING:
The large three-legged upset head evenly distributes the Bulb-tite rivet's high clamp load over a broader bearing surface than do conventional blind rivets. This enables soft, thin, ductile and even brittle materials to be securely clamped without deformation, cracking or other damage to the application.
HARD-TO-FASTEN APPLICATIONS:
Bulb-tite rivets function well in materials where other fasteners fail. The folded legs individually conform to curved surfaces enabling fastening onto pipes, corrugations and other challenging shaped applications. Oversized or elongated holes can be adequately covered by the large leg formations to resist pull through under stress in high tension-load applications.
MULTI-GRIP
CAPABILITY: Each Bulb-tite handles a wide variation in material thickness. Most sizes fasten over a 1/4" thickness range. Fewer rivet sizes may be required resulting in reduced inventory requirements and simplified fastener selection.
CHOICE OF FINISHED APPEARANCE:
Bulb-tite rivets are offered in a variety of head styles. Standard Dome, Low Profile, Large Flange and Countersunk head styles are available. Color matched plastic finish caps can be snapped onto certain Bulb-tite head styles to conceal installed rivet heads. The unique Shaveable Head Bulb-tite was specifically designed for use in heavy truck and trailer applications where solid rivets are used. They are ideal for repair of solid riveted assemblies where access to the application's blind side may be no longer accessible. The Shaveable Bulb-tite rivet head is finished using a special head-shaving tool. Shaved Bulb-tite rivet heads then match the appearance of solid rivets in the assembly.
MATERIAL CHOICES:
The standard Bulb-tite rivets are made of aluminum alloy, providing a durable non-rusting fastener that can withstand weather-related corrosion. Some Bulb-tite sizes are also available in steel and monel materials where higher strength is required.

Dome Peel Blind Rivets

Dome Peel Rivets split into four legs providing a large blind side bearing head for improved support in brittle, soft, or ductile materials. For more information or to place your order call us today.

Dome Peel Blind Rivets dome peel rivets
Head Style Rivet Dia. Nom JAY-CEE Part Number Grip Range(inch) Hole Size Drill No. Dimensions (Inches) Min. Strength (lbs)
D B Max. A L Max. Shear Tensile
Dome 1/8" PR42ASPP
PR43ASPP
PR44ASPP
PR46ASPP
PR47ASPP
.039 - .138
.098 - .197
.177 - .276
.256 - .354
.335 - .433
.142
#27
.122 - .138 .048 .228 - .256 .354
.433
.512
.590
.669
180 213
Dome 5/32" PR52ASPP
PR53ASPP
PR54ASPP
PR55ASPP
PR56ASPP
PR58ASPP
PR510ASPP
.039 - .118
.098 - .197
.177 - .256
.236 - .315
.295 - .394
.354 - .422
.452 - .551
.173
#17
.151 - .169 .059 .275 - .315 .354
.433
.512
.590
.669
.748
.827
315 450
Dome 3/16" PR62ASPP
PR63ASPP
PR64ASPP
PR65ASPP
PR66ASPP
PR68ASPP
PR610ASPP
PR612ASPP
.039 - .118
.098 - .197
.177 - .276
.256 - .354
.335 - .394
.375 - .472
.453 - .551
.531 - .748
204
#6
.183 - .201 .063 .335 - .374 .354
.433
.512
.590
.669
.748
.827
1.024
450 607

Avinox II Rivets

avinox rivets Avinox II rivets
RIVET MATERIAL MANDREL MATERIAL HEAD STYLE PART NUMBER BODY DIAMETER WORK HOLE DIAMETER GRIP RANGE BODY LENGTH (MAX.) HEAD DIAMETER (NOM.) HEAD HEIGHT (MAX.) TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE)
SHEAR TENSILE
"A" "H" "G" "M" "B" "D" STEM INSIDE SHEAR PLANE STEM OUTSIDE SHEAR PLANE
Avinox II Rivets LO-PROFILE HEAD PR42FFPA PR43FFPA PR44FFPA .122/.130 .130/.134 .039-.118 .118-.197 .197-.276 .350 .450 .540 .248 .043 360 382 719 360 360 360 450
PR52FFPA PR53FFPA PR54FFPA .153/.160 .161/.169 .039-.118 .118-.197 .197-.276 .400 .480 .600 .303 .059 1169 629 899
PR63FFPA PR64FFPA PR65FFPA .183/.191 .193/.201 .059-.138 .138-.236 .236-.335 .510 .610 .730 .366 .059 1236 877 1124

NOTE: Values for typical ultimate strengths are a guide only and may vary greatly depending upon the application.

*Blind rivet is a generic term for Pop rivets.*